NEC M260X User Manual
81
5. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[GENERAL]
[M350X/M300X/M260X/M230X/M300W/M260W/
M420X/M420XV]
M420X/M420XV]
[M350XS/M300XS/M260XS/M300WS/M260WS]
Using Digital Zoom [DIGITAL ZOOM] (M350XS/M300XS/M260XS/M300WS/M260WS)
This feature allows you to electronically fine adjust the image size on the screen. Use the
◀ or ▶ button to large or
reduce the projected image.
TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. To fine adjust the zoom, use the
[DIGITAL ZOOM] function. (
)
Enabling Auto Keystone [AUTO KEYSTONE]
This feature allows the projector to detect its tilt and correct vertical distortion automatically.
To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF].
To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF].
NOTE: The [AUTO KEYSTONE] function is not available when an orientation type such as [CEILING REAR], [DESKTOP REAR],
[CEILING FRONT] other than [DESKTOP/FRONT] is selected for [ORIENTATION].
TIP:
• The range of the AUTO KEYSTONE correction varies depending on the model name.
M420X/M420XV/M350X/M300X/M260X/M230X/M300W/M260W: up to 30 degrees (vertical)
M350XS/M300XS/M260XS/M300WS/M260WS: up to 20 degrees (vertical)
• The AUTO KEYSTONE correction will take effect in 2 seconds after changing the projection angle during projection.
Correcting Vertical Keystone Distortion Manually [KEYSTONE]
You can correct vertical distortion manually. (
)
TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment.
Saving Vertical Keystone Correction [KEYSTONE SAVE]
This option enables you to save your current keystone settings.
OFF ������������������������ Does not save current keystone correction settings� It will return your keystone correction settings to
“zero”�
ON ������������������������� Saves current keystone correction settings
Saving your change once affects all sources. The changes are saved when the projector is turned off.
NOTE: When [AUTO KEYSTONE] is set to [ON], [KEYSTONE SAVE] is not available. Next time you turn on the power, the AUTO
KEYSTONE function will work and the data stored with [KEYSTONE SAVE] will be invalid.