Promise Technology m210p User Manual
VTrak M310p, M210p Product Manual
138
•
Remaining Capacity – When status is “FullyCharged”, capacity should
be at least 90%. If less, replace the battery
be at least 90%. If less, replace the battery
•
Temperature Threshold Charge – If battery exceeds this value while
charging, replace the battery
charging, replace the battery
•
Battery Current – Positive during charge, negative during discharge
To recondition the battery:
1.
Highlight Recondition Battery and press Enter.
2.
Press Y to confirm.
Reconditioning the battery is a full discharge and recharge.
Locate Enclosure
This feature helps you identify the physical VTrak enclosure you are working with
through the CLU.
through the CLU.
1.
From the Main Menu, highlight Subsystem Management and press Enter.
2.
Highlight Enclosure Management and press Enter.
3.
Highlight Locate Enclosure and press Enter.
The LEDs on the front of the VTrak will blink for one minute.
Physical Drive Management
Physical Drive Management includes global and individual settings for physical
disk drives.
disk drives.
Global Physical Drive Settings
This screen enables you to make settings that apply to all physical drives in this
VTrak enclosure.
VTrak enclosure.
1.
From the Main Menu, highlight Physical Drive Management and press Enter.
2.
Highlight Global Physical Drives Settings and press Enter.
Write Cache
This feature enables/disables the write cache on all physical drives.
1.
Highlight Write Cache and press the spacebar to toggle between Enabled
and Disabled.
and Disabled.
2.
Press Ctrl-A to save your settings.
Read Ahead Cache
This feature enables/disables the read ahead cache on all physical drives.
1.
Highlight Read Look Ahead Cache and press the spacebar to toggle
between Enabled and Disabled.
between Enabled and Disabled.