Promise Technology m210p User Manual
Chapter 5: Management with the CLU
147
4.
Highlight the following parameters and press the backspace key to erase the
current value:
current value:
•
Alias - Type an alias into the field, if desired. Maximum of 32 characters.
Use letters, numbers, space between words and underscore.
Use letters, numbers, space between words and underscore.
•
Capacity - Maximum capacity shown. Enter a smaller capacity if
desired.
desired.
5.
Highlight the following parameters and press the spacebar to toggle though
the available choices:
the available choices:
•
Stripe size – Press the spacebar to select: 8, 16, 32, 64, 128, 256, 512
KB, or 1 MB
KB, or 1 MB
•
Sector size – Press the spacebar to select: 512 B; 1, 2, or 4 KB
•
Write Policy – Press spacebar to select: Write Back or Write Through
•
Read Policy – Press spacebar to select: No Cache, Read Cache, or
Read Ahead Cache
Read Ahead Cache
6.
Press Ctrl-A to save your settings.
Delete a Logical Drive
1.
From the Main Menu, highlight Disk Array Management and press Enter.
2.
Highlight the disk array that contains the logical drive you want to delete and
press Enter.
press Enter.
3.
Highlight the logical drive you want to delete and press the spacebar to mark
it.
it.
The mark is an asterisk (*) to the left of the listing.
4.
Highlight Delete Marked Logical Drives and press Enter.
5.
Press Y to confirm the deletion.
Note
If you did not use all of the available capacity of the disk array, you
can create an additional logical drive at this point.
can create an additional logical drive at this point.
Caution
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.
Back up all important data before deleting a logical drive.