Promise Technology m210p User Manual
Chapter 4: Management with WebPAM PROe
89
2.
Click on the Enclosures
icon.
3.
Click on the Enclosure
icon.
4.
Click on the Physical Drives
icon.
5.
Click on a Physical Drive
icon.
6.
In Management View, click on the physical drives in the graphic.
The Disk Status LED will flash to identify the carrier holding the drive.
Figure 7. VTrak M310p/M210p disk carrier LEDs
Physical Drive Settings
The Physical Drive–Settings tab enables you to specify an alias for a physical
disk drive. To make physical drive settings:
disk drive. To make physical drive settings:
1.
Click the Subsystem
icon in Tree View.
2.
Click on the Enclosures
icon.
3.
Click on the Enclosure
icon.
4.
Click on the Physical Drives
icon.
5.
Click on a Physical Drive
icon.
6.
Click on the Settings tab in Management View.
7.
Type an alias into the Physical Drive Alias field.
Maximum of 32 characters. Use letters, numbers, space between words,
and underscore. An alias is optional.
and underscore. An alias is optional.
8.
Click the Submit button.
Clear Physical Drive Conditions
The Physical Drive–Clear tab enables you to clear certain conditions from a
physical drive. The Clear tab only appears when those conditions are present.
physical drive. The Clear tab only appears when those conditions are present.
•
Stale – The physical drive contains obsolete disk array information.
•
PFA – The physical drive has errors resulting in a prediction of failure.
Disk Status