Nortel Networks 83c User Manual

Fine-tuning the Projector

7. When you see this screen, select a zoom rate (display size), and

then press

Enter

8. When you see the message

Save image as user’s logo?

, select

Yes

and press

Enter

. Saving the logo takes a few moments. Do

not use the projector or other sources (computer, video, etc.)
while the logo is being saved. When you see the message

Completed

, press

Esc

9. To display the logo as the background screen when you press the

A/V Mute

button or when no image signal is available, select the

Extended

menu and press

Enter

. Then select

Display

Background

, and

Logo

and press

Enter

. Select

A/V Mute

and

Logo

and press

Enter

10. When you’re finished, press

to exit the menus.

Setting a Password

1. Press the

Freeze

button on the remote control for about five

seconds until you see the Password Protect menu:

2. Select

Password

and press

Enter

note

The default setting for the

Startup Screen

option

menu is

. If the

Startup

Screen

is set to

Off

, the

logo will not display at
startup.

If the User’s Logo Protect
function has been set to

the

Display Background

setting cannot be changed.
You need to turn the protect
function off first. See
page 65 for details.

Once you’ve saved a user’s
logo, you cannot reset the
logo setting to its factory
default (no logo).

note

If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 66.