Nortel Networks 83c User Manual

Before you can monitor a projector, you have to register it. Follow 
these steps to automatically search for your projector. 

1. Open EMP Monitor.

2. Select 

Edit > New > Projector (automatic search)

. 

3. Click 

Search

 to locate projectors currently operating on the 

network.

4. Select the projector you want to add by clicking its name, then 

click the 

Edit

 button. 

5. Enter a Display name, select a Parent group, if necessary, enter a 

Monitor Password, if necessary, and a Description for the 
projector. 

6. Click the 

Register

 button.

7. Repeat steps 2 through 5 to register any additional projectors on 

the network.

8. When you’re done adding the projector, click 

Cancel

. You see a 

screen with a list of all registered projectors:

The EMP Monitor screen lets you monitor your projector status and 
check if a problem has occurred. 

For the most current status, click the 

Refresh

 button. 

The following table describes the EMP Monitor status icons. 

No warnings or problems in the projector group.

Warning or problem in a projector in the group.

Monitoring disabled. Right click the icon and select 
Monitoring Enabled to begin monitoring the group.

Data is currently being updated.

Delete

Network On

Standby Mode

Property