Dukane 8767A User Manual

3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

Turning on the Projector

NOTE:
• The projector has two power switches: a main power switch and a POWER (ON/STAND BY) button.

• When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off (

䡬)

position. Failure to do so may cause damage to the projector.

STATUS

LAMP

POWER

1. To turn on the main power to the projector, press the

Main Power switch to the on position ( I ).

•

The POWER indicator will light orange.
See the Power Indicator section on page

for more

details.

2. Press the POWER (ON/STAND BY) button on the

projector cabinet or the POWER button on the remote
control for a minimum of 2 seconds. The POWER
indicator will turn to green and the projector will
become ready to use.

After you turn on your projector, ensure that the
computer or video source is turned on and that your
lens cap is removed.

NOTE: When no signal is available, a blue, black or logo screen is
displayed.
When the projector displays a blue or a black screen (not logo),
the Eco mode will be automatically selected in "Lamp Mode."

NOTE: If you turn on the projector immediately after the lamp is
turned off or when the temperature is high, the fans runs without
displaying an image for some time and then the projector will
display the image.

LAMP

STATUS

POWER

VIDEO

S-VIDEO

ON/STAND BY

SELECT

POWER

SOURCE

PIC-MUTE

ASPECT

MAGNIFY

PAGE

OFF

POWER

PIC-MUTE

DOWN

8767A8070

8771

POWER

STATUS

LAMP

STATUS

LAMP

STATUS

LAMP

Standby

Blinking

Power On

Steady orange light

Blinking green

light

Steady green

light

See page

for more details.