TP-LINK TL-SG2109WEB User Guide
55
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
All Ports: By operating on this field expediently, you can set the values of
all ports in the corresponding field.
All VLAN: Display all defined Tag VLANs.
all ports in the corresponding field.
All VLAN: Display all defined Tag VLANs.
Figure 5-40 All Tag VLAN
Select All: Select all ports to be the VLAN member.
Clean Up: Clean up all members of the VLAN.
Submit: Submit to buildup a VLAN with the selected members.
Clean Up: Clean up all members of the VLAN.
Submit: Submit to buildup a VLAN with the selected members.
Notice:
1) VID of the VLAN must be unique and within the range of 1 to 4094.
2) At least two port members should be included to add a VLAN group. (If the
2) At least two port members should be included to add a VLAN group. (If the
page is submitted with 0 VLAN member, it indicates to delete the VLAN.)
3) If any Trunk has been set, the Trunk can be configured as a VLAN
member and member ports of the Trunk cannot be configured (see Port 1
and 2 in the figure for example).
and 2 in the figure for example).
4) If the port is connected to a device that doesn’t support IEEE802.1Q (e.g.
HUB and some network adapter), value of the Egress Frame field should
be set to “Drop Tag”.
be set to “Drop Tag”.
5) For the first time the Port VLAN mode is set, a default VLAN, which is
indexed as NO. 1 and contains all switch ports, will be built up.
6) The ports haven’t been assigned to any VLAN manually cannot
communicate with each other or other VLAN. That’s different from the Port
VLAN.
VLAN.