TP-LINK TL-SG3424P User Manual

Choose the menu

ACL→ACL Config→Extend-IP ACL to load the following page.

Figure11-8 Create Extend-IP Rule

The following entries are displayed on this screen:



Create Extend-IP ACL

ACL ID:

Select the desired Extend-IP ACL for configuration.

Rule ID:

Enter the rule ID.

Operation:

Select the operation for the switch to process packets which match the

rules.


Permit: Forward packets.



Deny: Discard Packets.

S-IP:

Enter the source IP address contained in the rule.

D-IP:

Enter the destination IP address contained in the rule.

Mask:

Enter IP address mask. If it is set to 1, it must strictly match the

address.

IP Protocol:

Select IP protocol contained in the rule.

TCP Flag：

Configure TCP flag when TCP is selected from the pull-down list of IP

Protocol.

S-Port:

Configure TCP/IP source port contained in the rule when TCP/UDP is

selected from the pull-down list of IP Protocol.

D-Port:

Configure TCP/IP destination port contained in the rule when

TCP/UDP is selected from the pull-down list of IP Protocol.

DSCP:

Enter the DSCP information contained in the rule.

167