Tripp Lite 108 User Manual
USER GUIDE
8
3 . C o n n e c t i n g t h e S m a r t C AT 5 s ys t e m
Each computer/ server is directly connected to the Smart CAT5 via the appropriate
ROC or RICC using CAT5 cable in a star configuration. The system can contain a
mixture of RoCs and RICCs. No external power is needed at the remote ROC/RICCs.
The ROC/RICCs draw their power from the computer’s keyboard port (ROC/RICC
PS/2, SUN) or from the USB port (ROC/RICC USB). The figures below illustrate the
ROC PS/2 and ROC USB.
ROC or RICC using CAT5 cable in a star configuration. The system can contain a
mixture of RoCs and RICCs. No external power is needed at the remote ROC/RICCs.
The ROC/RICCs draw their power from the computer’s keyboard port (ROC/RICC
PS/2, SUN) or from the USB port (ROC/RICC USB). The figures below illustrate the
ROC PS/2 and ROC USB.
Figure 4 ROC PS/2
Figure 5 ROC USB (SUN)
3.1 Connecting a ROC/RICC PS/2
The connections for ROC/RICC PS/2 are exactly the same. Figure 6 illustrates the
RICC PS/2.
RICC PS/2.
You can connect the ROC/RICC PS/2 to a powered on computer, but it must be in the
following order:
following order:
1. Connect the Mouse connector to the computer’s Mouse port.
2. Connect the Keyboard connector to the computer’s Keyboard port.
3. Connect the Screen connector to the computer’s Video port.
Failure to connect in the above order while the server is running, may lead to the
mouse malfunctioning until the server is rebooted.
mouse malfunctioning until the server is rebooted.
To computer’s
keyboard port
keyboard port
To computer’s
mouse port
mouse port
To computer’s
Video card
Video card
To computer’s
USB Port
USB Port
To computer’s
Video Card
Video Card