Transition Networks SPOEB10XX-100 User Manual

The SPOEB10xx-1xx Power over Ethernet (POE)

is a two port 10/100Base-TX to 100Base-FX media converter capable of providing
power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media
Dependent Interface (MDI) twisted pair cable. The SPOEB10xx-100 emulates Power
Sourcing Equipment (PSE) and provides power via the 10/100Base-TX interface for a
remote PD device that complies with the IEEE802.3af™ standard.  

Installation  . . . . . . . . . . . . . .3
Operation  . . . . . . . . . . . . . . .9
Cable Specifications  . . . . . .10
Technical Specifications  . . .12
Troubleshooting  . . . . . . . . .13
Contact Us  . . . . . . . . . . . . .15
Compliance Information  . . .16

SPOEB1011-100 RJ-45

100 m (328 ft.)*

ST, 1300 nm multimode
2 km (1.2 miles)

SPOEB1013-100 RJ-45

100 m (328 ft.)*

SC, 1300 nm multimode
2 km (1.2 miles)

SPOEB1014-100 RJ-45

100 m (328 ft.)*

SC, 1310 nm single mode
20 km (12.4 miles)

SPOEB1015-100 RJ-45

100 m (328 ft.)*

SC, 1310nm single mode
40 km (24.9 miles) 

SPOEB1016-100 RJ-45

100 m (328 ft.)*

SC, 1310 nm single mode
60 km (37.3 miles)

SPOEB1017-100 RJ-45

100 m (328 ft.)*

SC, 1550 nm single mode
80 km (49.7 miles)

*Cable distances are the typical maximum distances.  Actual distance is
dependent upon the physical characteristics of the network installation.

SPOEB1035-100 RJ-45

100 m (328 ft.)*

SC, 1310 nm single mode
120 km (74.6  miles)