Transition Networks SISGM1040-162D User Manual

Transition Networks

SISGM1040-162D-LR

Technical Support: 1-800-260-1312

International: 00-1-952-941-7600

Rate Limiting

You can set up every port’s bandwidth rate and frame limitation type.

Ingress Limit Frame type: Select the frame type that you expect to filter. The

frame types have 4 options for selecting: All, Broadcast/Multicast/Flooded

Unicast, Broadcast/Multicast and Broadcast only.

Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast

only types are selectable for ingress frames. But, the egress rate only supports ’All’

frame type.

Rate Limiting interface

All the ports support ingress and egress rate control which can be selected from

160kbps to 128000kbps. The switch will perform the ingress/egress rate by packet

counter to meet the specified rate.

Ingress: Select the port effective ingress rate (The default value is “0”)

Egress: Enter the port effective egress rate (The default value is “0”)

And then, click

Apply

to apply the settings.