WHP Wireless WHP-1130 User Manual
The log shows the time, the IP address of the reporting Outdoor AP, and the event.
You can save, open, and delete log files through the File menu.
You can save, open, and delete log files through the File menu.
Config Window – Advanced Panel
You may set the packet size of RES Thresholds and Fragmentation Thresholds in the
Advanced panel. The panel also contains a Tx Power (mW) control with options for
setting the AP’s transmitter power to 5, 10, 30, 50, or 100 mW.
You may set the packet size of RES Thresholds and Fragmentation Thresholds in the
Advanced panel. The panel also contains a Tx Power (mW) control with options for
setting the AP’s transmitter power to 5, 10, 30, 50, or 100 mW.
Important:
Once all configurations have been completed, click OK. You will be reminded that a
reset is required to make the changes effective. Click Yes.
Once all configurations have been completed, click OK. You will be reminded that a
reset is required to make the changes effective. Click Yes.
Figure 25. Warning before AP reset
Monitor
The Monitor tool allows the Outdoor AP’s status, Ethernet statistics, wireless
statistics, and other configuration information to be viewed/monitored.
statistics, and other configuration information to be viewed/monitored.
In the Hosts View window (Figure 26), select a device and click the Monitor button
on the toolbar or on the popup menu.
on the toolbar or on the popup menu.
Outdoor Access Point
35