Cabletron Systems SM-CSI1076 User Manual

C o n f i g u r a t i o n V i e w s

R e p e a t e r C o n f i g u r a t i o n V i e w

S p e c t r u m E n t e r p r i s e M a n a g e r

Page 57

S m a r t S w i t c h 6 0 0 0

This area of the Repeater Configuration view 
allows you to enable or disable the following 
traps.

Allows all packets indicating a change in link 
status to be reported within the trap database. 
Possible menu selections are: Disable, Enable, 
and other.

Allows all packets indicating a change in 
segmentation status to be reported within the 
trap database. Possible menu selections are: 
Disable, Enable, and other.

This area of the Repeater Configuration view 
provides configuration information on generating 
alarms for the selected module. This area 
contains the fields described below.

Displays the user defined time interval, in 
seconds, for the Traffic Threshold. The lowest 
allowable value is 10.

Allows you to enable or disable detection of Traffic 
Alarms.

Displays the threshold value for the number of 
packets that can be transmitted during the 
Timebase before generating a traffic alarm. This 
field is user-configurable from 1 to 4 billion.

Allows you to enable or disable detection of 
Collision Alarms.

Displays the threshold value within the alarm 
timebase which, once that number of collisions 
per good packet is exceeded, generates a collision 
alarm. This value is user-configurable. Allowable 
range is 1 to 15 collisions per good packet.

Allows you to enable or disable detection of 
Broadcast Alarms. 

Displays the threshold value within the alarm 
timebase which, once that number of broadcasts 
received is exceeded, generates a broadcast 
alarm. This value is user-configurable. Allowable 
range is 1 to ~4 billion.