iogear ocs1924 User Manual
32
Upgrade Fail
If you don’t see “Firmware upgrade OK” in the “Status Messages” window, it means the utility has failed to
complete the firmware successfully. If that occurs, please do the following:
complete the firmware successfully. If that occurs, please do the following:
Step 1
Unplug all USB cables and DC power adapter from GCS1924.
Unplug all USB cables and DC power adapter from GCS1924.
Step 2
Plug single USB cable in the last CPU port with PC powered on.
Plug single USB cable in the last CPU port with PC powered on.
Step 3
Plug DC power adapter, the GCS1924's port LED will start flash after powered on.
Plug DC power adapter, the GCS1924's port LED will start flash after powered on.
Step 4
Run FW upgrade program again
Run FW upgrade program again