Cabletron Systems TRXI-42 User Manual

 

Page 3-3

 

Refer to Figure 3-2 and perform these steps to install the TRXI in a 
19-inch rack.

1.

Remove four cover screws (two from each side) located along the 
front edges of each side of the TRXI.

2.

Using the four cover screws removed in step 1, attach the rack 
mounting brackets to each end of the TRXI. 

Figure 3-2. Rack Mount Brackets Installation

3.

With the mounting brackets installed, position the TRXI between 
the vertical frame members of the 19-inch rack and fasten it 
securely with the mounting screws (see Figure 3-3).

Figure 3-3. Installing the TRXI in the Rack

TRXI-24 

 TOKEN RING HUB 

WITH

 LANVIEW®

Screws (4)

Wall/Rack Mounting

Brackets (2)

Screws (4)

19-Inch Rack

TRXI-24 

 TOKEN RING HUB 

WITH

 LANVIEW®