Cabletron Systems TRXI-42 User Manual

Page 4-5

Alarm messages pertain to events that occur within the TRXI. Press 
the Display button and hold for five seconds to access the alarm 
messages queue. You can scroll through each message by pressing the 
Display button. If you do not press the Display button for ten seconds, 
the LCD defaults to the product name.

No Messages in

No alarm messages in queue. This is

Queue

the Alarm Messages default setting.

Port xxxxxx

Network port or TPIM turned off

Disabled

via Local or Remote Management.

Port xxxxxx

Network port or TPIM turned on

Enabled

via Local or Remote Management.

Port xx Violation

Indicates unauthorized access 
attempt at network lobe ports.

Ring Beaconing

Indicates a station is attempting to 
recover from a hardware problem on 
the ring.

Beacon Recovered

Indicates the ring has recovered 

from a beaconing situation.

Beacon Recv

Indicates that a station has been

Port xx Removed

removed from the ring as a result of 

the beacon recovery process.

Ring Port xx Faulted

Indicates a TPIM RI or RO has 

Autowrapped.

Fault Recovery Oscillation

Indicates that the network has been 

in and out of a beaconing state 
several times.