Cabletron Systems STS16-20D User Manual
232
SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Cable and Pin Information
Twisted-Pair Cable Pin Outs
When connecting devices to the token-ring ports on the switch, you must use a
straight-through cable. Diagrams of these cables follow.
straight-through cable. Diagrams of these cables follow.
Straight-Through 100-Ohm/120-Ohm Cable
The switch RJ-45 connector makes ground available on the shield and on pins 1, 2,
7, and 8. Shielded cables will provide continuity for ground to any shielded
connector on the other end of the cable.
7, and 8. Shielded cables will provide continuity for ground to any shielded
connector on the other end of the cable.
Figure 30. Straight-Through Cable
150-Ohm IBM STP Data Connector-to-RJ-45 Straight-Through Cable
Figure 31. Data Connector-to-RJ-45 Straight-Through Cable