iogear GCL1808/ User Manual
30
31
Notes:
The diagram depicts the administrator’s main
1.
screen. The user main screen does not show
the F4 and F6 functions, since these are
reserved for the administrator and can’t be
accessed by users.
The OSD always starts in list view, with the
the F4 and F6 functions, since these are
reserved for the administrator and can’t be
accessed by users.
The OSD always starts in list view, with the
2.
highlight bar at the same position it was in the
last time it was closed.
Only the ports that have been set accessible
last time it was closed.
Only the ports that have been set accessible
3.
by the administrator for the current logged in
user are visible.
If there is a next to the monitor icon, which
user are visible.
If there is a next to the monitor icon, which
4.
means that port is attached to another KVM
(Cascading). Click on a switch number, or
move the highlight bar to it then press the
right arrow key to expand the list. Similarly, to
collapse a switch’s port list, click on the switch
number, or move the highlight bar to it then
press the left arrow key to collapse the list.
(Cascading). Click on a switch number, or
move the highlight bar to it then press the
right arrow key to expand the list. Similarly, to
collapse a switch’s port list, click on the switch
number, or move the highlight bar to it then
press the left arrow key to collapse the list.