Cabletron Systems STS16-20R User Manual
190
SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Monitoring the Network from the Console Statistics Menu
Dsg SwId/BrId (Designated Bridge ID)
A unique bridge identifier of the bridge that is assumed to be the device through which
this port has determined it must communicate with the root of the spanning tree.
this port has determined it must communicate with the root of the spanning tree.
Dsg PId (Designated Port Identifier)
Port on the designated bridge through which this switch will communicate with the
root of the spanning tree. This information is useful if the switch is the designated
bridge on one or more network segments.
root of the spanning tree. This information is useful if the switch is the designated
bridge on one or more network segments.
# Chgs
Number of topology changes, that is, the number of times the port has entered the
forwarding state plus the number of times the port has made the transition from
forwarding to blocking. The counter is reset when the switch is reset or the
spanning tree is turned on.
forwarding state plus the number of times the port has made the transition from
forwarding to blocking. The counter is reset when the switch is reset or the
spanning tree is turned on.
Last Chg
Time since the port last entered the forwarding state or made the transition from
forwarding to blocking.
forwarding to blocking.
You cannot change any information on this screen. To change the spanning tree
parameters, refer to the section “Spanning Tree for BRF Screen” on page 99.
parameters, refer to the section “Spanning Tree for BRF Screen” on page 99.