Cabletron Systems STS16-20R User Manual
80
SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Switch Configuration
Switch Configuration Screen
To open this screen from the main menu, select Configuration
→
→
→
→
Switch
Configuration
....
Use the Switch Configuration screen to view system information and to view or
change the system name, location, contact, and time of day. To add or change the
system name, location, contact or time of day, use the arrow keys to highlight the
field and press the
change the system name, location, contact, and time of day. To add or change the
system name, location, contact or time of day, use the arrow keys to highlight the
field and press the
ENTER
key. A prompt appears near the bottom of the screen for
entering text for that field. Pressing
ENTER
again enters that text.
The following explains the fields in the Switch Configuration screen.
System Description
Name and model of the switch, or, in the case of a stack, the generic stack name. In
addition to this, the firmware release is displayed. Information in this field cannot
be changed.
addition to this, the firmware release is displayed. Information in this field cannot
be changed.
Build Description
Describes when the firmware running in the switch was built. Information in this
field cannot be changed.
field cannot be changed.
DRAM Installed
Amount (in MB) of dynamic memory installed. Information in this field cannot be
changed.
changed.