Cabletron Systems STS16-20R User Manual
85
Switch Configuration
SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
is listed as module 2.
Status
Whether the module is up, down, failed, or the slot is empty.
Model
Type of module. The switch is listed for the base switch. For this module as well as
for others, this field displays the product number.
for others, this field displays the product number.
Board ID
Decimal identifier of the module.
HW Rev
Hardware revision level. If (4K) is displayed after the number, this module will
prevent the switch (or stack of switches) from operating with an MTU size above
4,472 bytes. If HW Rev is set to NA, the module does not support reading of the
hardware revision.
prevent the switch (or stack of switches) from operating with an MTU size above
4,472 bytes. If HW Rev is set to NA, the module does not support reading of the
hardware revision.
FW Rev
Firmware revision level.
Ports
Number of ports on the module.
Up Time
Amount of time that the module has been up (since the last reset).
You cannot change the information that appears on this screen.