Cabletron Systems TRXI-44 User Manual

 

Page 3-1

 

This chapter outlines the procedure for installing a TRXI and 
connecting it to a network. Be sure that your network meets the 
guidelines and requirements outlined in Chapter 2, 

 

, before installing the TRXI.

 

Unpack the TRXI as follows:

•

Remove the TRXI from the shipping box.

•

Slide the two foam end caps off the TRXI.

•

Remove the TRXI from the protective plastic bag and set it 
aside to prevent damage.

•

Visually inspect the TRXI. If there are any signs of damage, 
contact Cabletron Systems Technical Support immediately.

 

Attach the strain relief bracket to the front of the TRXI as follows:

1.

Locate the strain relief bracket and four 8-32 x 3/8" screws from the 
TRXI installation kit.