Cabletron Systems TRXI-44 User Manual
INSTALLATION
Page 3-6
3.4
SETTING THE RING SPEED SWITCH
The TRXI’s Ring Speed switch lets you select ring speeds of 16 Mbps
or 4 Mbps. The factory default setting of the Ring Speed Switch
is 16 Mbps. Figure 3-6 shows the location of the Ring Speed Switch
and the switch settings. You can access the switch through the air vent
with a small screwdriver.
or 4 Mbps. The factory default setting of the Ring Speed Switch
is 16 Mbps. Figure 3-6 shows the location of the Ring Speed Switch
and the switch settings. You can access the switch through the air vent
with a small screwdriver.
To change the ring speed:
1.
Turn off the TRXI.
2.
Place a small screwdriver through the TRXI’s air vent to access the
Ring Speed Switch.
Ring Speed Switch.
3.
Use the screwdriver to slide the switch to the desired setting as
shown in Figure 3-6.
shown in Figure 3-6.
4.
Turn on the TRXI.
5.
Check that the Ring Speed LED indicates the correct setting.
Figure 3-6. The Ring Speed Switch
DISPLAY
TRXI-24
TOKEN RING HUB
WITH
LANVIEW®
RING SPEED SWITCH SETTINGS
4 Mbps
16 Mbps
Ring Speed LED Indicator
On = 16 Mbps
Off = 4 Mbps
On = 16 Mbps
Off = 4 Mbps