iogear 8-port dvi kvmp switch User Manual
OSD Main Screen
After the log in, a screen similar to the one
at right appears:
After the log in, a screen similar to the one
at right appears:
1. The diagram depicts the administrator’s
main screen. The user main screen
does not show the F4 and F6 functions
because these are reserved for the
administrator and can’t be accessed by
users.
does not show the F4 and F6 functions
because these are reserved for the
administrator and can’t be accessed by
users.
2. The OSD always starts in list view, with
the highlight bar at the same position it
was in the last time it was closed.
was in the last time it was closed.
3. Only the ports that have been set
accessible by the administrator for the
current logged in user are visible.
current logged in user are visible.
4. If there is a next to the monitor icon,
which means that port is attached to
another KVM (Cascading). Click on a
switch number, or move the highlight
bar to it then press the right arrow key
to expand the list. Similarly, to collapse
a switch’s port list, click on the switch
number, or move the highlight bar to it
then press the left arrow key to collapse
the list.
another KVM (Cascading). Click on a
switch number, or move the highlight
bar to it then press the right arrow key
to expand the list. Similarly, to collapse
a switch’s port list, click on the switch
number, or move the highlight bar to it
then press the left arrow key to collapse
the list.
One Level Main OSD Screen
Cascading 2nd Main OSD Screen
Cascading 2nd level screen
Cascading 2nd level screen
16
Trigger OSD
Simply press [Scroll Lock] [Scroll Lock] rapidly.
Simply press [Scroll Lock] [Scroll Lock] rapidly.
Note: This hotkey sequence can be changed to [Ctrl] [Ctrl] for Mac users. Please refer to
Hotkey Setting Mode (HSM) section.
Hotkey Setting Mode (HSM) section.
The OSD of GCS1108 / GCS1208 incorporates a two level (administrator and user) password
system. Before the OSD main screen displays, a login screen appears requiring a password. If
this is the first time that the OSD is used, or if the password function has not been set, simply
press [Enter]. The OSD main screen displays in administrator mode. In this mode, you have
administrator privileges, with access to all administrator and user functions, and can set up
operations (including password authorization) as you like. If the password function has been set,
you must provide an appropriate administrator/user password in order to access the OSD.
system. Before the OSD main screen displays, a login screen appears requiring a password. If
this is the first time that the OSD is used, or if the password function has not been set, simply
press [Enter]. The OSD main screen displays in administrator mode. In this mode, you have
administrator privileges, with access to all administrator and user functions, and can set up
operations (including password authorization) as you like. If the password function has been set,
you must provide an appropriate administrator/user password in order to access the OSD.
On-screen Display (OSD) Operation
OSD Login
By default, the Login and Password are
blanks, so simply press [Enter] [Enter] to
login. If you have set a user name and
password on the KVM, simply enter them
and press enter to login.
By default, the Login and Password are
blanks, so simply press [Enter] [Enter] to
login. If you have set a user name and
password on the KVM, simply enter them
and press enter to login.