Cabletron Systems SSIM-H2-02 User Manual
47
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Statistics
Port Status
Besides the ordinary Token-Ring ports, the table contains an entry for each TS
virtual port, along with its current status.
virtual port, along with its current status.
When Port Status is selected on the Statistics menu, the following items are
displayed:
displayed:
Port
The TS port for which the virtual port is defined. Possible values are: 21, 22, 25,
and 26.
and 26.
TrCRF
The name of the CRF in which the virtual port is defined.
TrBRF
The name of the BRF in which the virtual port is defined.
Enabled/Ins
For ordinary Token Ring ports, this is the enabled and inserted status. This does not
apply to virtual ports on a TS port. Instead, the current state of the virtual port is
displayed. For details, refer to the description of virtual port configuration.
apply to virtual ports on a TS port. Instead, the current state of the virtual port is
displayed. For details, refer to the description of virtual port configuration.
Spd
The connect speed in Mbps, which is displayed as 10 or 100 for TS module virtual
ports. Note that 100 Mbps full-duplex is the total bandwidth available on a TS port
and is shared by all the virtual ports on that port. The actual bandwidth on a
particular virtual port depends on the amount of traffic on other virtual ports.
ports. Note that 100 Mbps full-duplex is the total bandwidth available on a TS port
and is shared by all the virtual ports on that port. The actual bandwidth on a
particular virtual port depends on the amount of traffic on other virtual ports.
Oper Mode
The operation mode is for TS virtual ports may be displayed as HDX (Half DupleX)
or FDX (Full DupleX).
or FDX (Full DupleX).
Fwd Mode
The forwarding mode is always displayed as Store-Fwd, since the SSIM-H2-02
always operates in the store-and-forward switching mode.
always operates in the store-and-forward switching mode.