Cabletron Systems DLE33-MA User Manual
Chapter 5: Local Management
5-38
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
IP Address (Modifiable)
This display allows the IP address to be set for the DLE2X-MA and
DLE3X-MA. To set the IP address, refer to Section 5.15.1.
DLE3X-MA. To set the IP address, refer to Section 5.15.1.
Subnet Mask (Modifiable)
Displays the subnet mask for the module. A subnet mask “masks out” the
network bits of the IP address by setting the bits in the mask to 1 when the
network treats the corresponding bits in the IP address as part of the
network or subnetwork address, or to 0 if the corresponding bit identifies
the host. When an IP address is entered in the IP Address field, the subnet
mask field automatically enters the default subnet mask for the IP address.
For details about how to change the subnet mask from its default value,
refer to Section 5.15.2.
network bits of the IP address by setting the bits in the mask to 1 when the
network treats the corresponding bits in the IP address as part of the
network or subnetwork address, or to 0 if the corresponding bit identifies
the host. When an IP address is entered in the IP Address field, the subnet
mask field automatically enters the default subnet mask for the IP address.
For details about how to change the subnet mask from its default value,
refer to Section 5.15.2.
Default Gateway (Modifiable)
Displays the default gateway for the DLE2X-MA and DLE3X-MA. This
field is not defined until an appropriate value is entered. For details about
why and how to set the Default Gateway, refer to Section 5.15.3.
field is not defined until an appropriate value is entered. For details about
why and how to set the Default Gateway, refer to Section 5.15.3.
TFTP Gateway IP Addr (Modifiable)
Displays and allows the user to set the TFTP Gateway IP address for the
DLE2X-MA and DLE3X-MA. To set the TFTP Gateway IP address, refer
to Section 5.15.4.
DLE2X-MA and DLE3X-MA. To set the TFTP Gateway IP address, refer
to Section 5.15.4.
Module Date (Modifiable)
Contains a value that the module recognizes as the current date. To set a
new module date, refer to Section 5.15.5.
new module date, refer to Section 5.15.5.
Module Time (Modifiable)
Contains a value that the module recognizes as the current time. To enter a
new time, refer to Section 5.15.6.
new time, refer to Section 5.15.6.
Screen Refresh Time (Modifiable)
Contains the rate at which the screens are updated. This setting
determines how frequently (in seconds) information is updated on the
screen. To enter a new update time, refer to Section 5.15.7.
determines how frequently (in seconds) information is updated on the
screen. To enter a new update time, refer to Section 5.15.7.