Cabletron Systems DLE33-MA User Manual
Module Specific Configuration Menu Screen
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
5-69
The High Speed Configuration screen for the DLE3X-MA allows
management of the installed HSIM. For details, refer to the applicable
HSIM User’s Guide.
management of the installed HSIM. For details, refer to the applicable
HSIM User’s Guide.
FLASH DOWNLOAD
The FLASH Download screen allows the user to force the DLE2X-MA
and DLE3X-MA to download a new image file to FLASH memory from a
TFTP server. For details, refer to Section 5.24.
and DLE3X-MA to download a new image file to FLASH memory from a
TFTP server. For details, refer to Section 5.24.
PORT REDIRECT FUNCTION
The Port Redirect Function screen allows the user to redirect traffic from
one or more ports on the module to a specific destination port on the
module. For details, refer to Section 5.25.
one or more ports on the module to a specific destination port on the
module. For details, refer to Section 5.25.
Section 5.15.9, Setting the Operational Mode, describes how to
configure the modules to function as 802.1D switches.
configure the modules to function as 802.1D switches.
BROADCAST SUPPRESSION
The Broadcast Suppression screen allows the user to set a desired limit of
receive broadcast frames per port per second. For details, refer to
Section 5.26.
receive broadcast frames per port per second. For details, refer to
Section 5.26.
802.1Q VLAN Configuration
This menu item will only display if the module has been configured to
operate as an IEEE 802.1Q switch and the Management Mode has been
set to STAND ALONE. When selected, this menu item opens the VLAN
Main Menu screen. For details, refer to the Port Based VLAN User’s
Guide. Section 5.15.9, Setting the Operational Mode, describes how to
configure the modules to function as 802.1Q switches. Section 5.15.10,
Setting the Management Mode, describes how to set the module to
STAND ALONE management mode.
operate as an IEEE 802.1Q switch and the Management Mode has been
set to STAND ALONE. When selected, this menu item opens the VLAN
Main Menu screen. For details, refer to the Port Based VLAN User’s
Guide. Section 5.15.9, Setting the Operational Mode, describes how to
configure the modules to function as 802.1Q switches. Section 5.15.10,
Setting the Management Mode, describes how to set the module to
STAND ALONE management mode.
The module does not have to be in STAND ALONE mode to
operate as an 802.1Q switch. In DISTRIBUTED management
mode, 802.1Q VLANs are created and maintained via the
802.1Q VLAN CONFIGURATION menu item on the Chassis
Menu screen. Refer to Section 5.6 for details.
operate as an 802.1Q switch. In DISTRIBUTED management
mode, 802.1Q VLANs are created and maintained via the
802.1Q VLAN CONFIGURATION menu item on the Chassis
Menu screen. Refer to Section 5.6 for details.