Cabletron Systems DLE33-MA User Manual
Appendix C: Mode Switch Bank Settings and Optional Installations
C-2
DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide
Figure C-1 shows the location of the mode switches and the switch
settings for normal operation.
settings for normal operation.
Figure C-1
DLE2X-MA and DLE3X-MA Mode Switch
Location/Component Layout
Switch definitions and positions are as follows:
•
Switches 1 through 4 – For Digital Equipment Corporation use only.
•
Switch 5 – COM Port Autobaud. The default (OFF) position enables
Autobaud sensing on the COM port for Local Management sessions.
Changing the switch to the ON position disables Autobaud sensing
and sets the COM port to 9600 baud for Local Management sessions.
Autobaud sensing on the COM port for Local Management sessions.
Changing the switch to the ON position disables Autobaud sensing
and sets the COM port to 9600 baud for Local Management sessions.
•
Switch 6 – Forced BootP. Changing the position of this switch (i.e.,
moving the switch from one position to the other) clears download
information from NVRAM and forces the DLE2X-MA and
DLE3X-MA to download a new image file from a BootP server after
power to the chassis is restored, or the RESET button is pressed.
moving the switch from one position to the other) clears download
information from NVRAM and forces the DLE2X-MA and
DLE3X-MA to download a new image file from a BootP server after
power to the chassis is restored, or the RESET button is pressed.
Flash
DRAM
MODE SWITCH BANK
1
2
3
4
5
6
7
8
OFF
ON
LKG-10976-98F