Cabletron Systems DLE23-MA User Manual
DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide
C-1
APPENDIX C
MODE SWITCH BANK SETTINGS AND
OPTIONAL INSTALLATIONS
This appendix covers the following items:
•
Required tools (Section C.1)
•
Locations, functions, and settings for the mode switches (Section C.2)
•
Installing Optional Fast Ethernet Interface Modules (Section C.3)
C.1
REQUIRED TOOLS
You need the following tools to perform the procedures provided in this
appendix:
appendix:
•
Antistatic wrist strap (provided with DLM6C-AA chassis)
•
Phillips screwdriver
C.2
SETTING THE MODE SWITCH
These mode switches are set at the factory and do not need to be changed
unless you intend to perform the following:
unless you intend to perform the following:
•
Force download a new image file from a BootP server.
•
Clear NVRAM and restore all user-entered parameters such as the IP
address and subnet masks to the DLE2X-MA and DLE3X-MA
“Default” configuration settings.
address and subnet masks to the DLE2X-MA and DLE3X-MA
“Default” configuration settings.
•
Clear user-entered passwords stored in NVRAM and restore the
default passwords.
default passwords.
The following procedures may also be performed through Local
Management. The mode switches should only be used if it is
not possible to make a Local Management connection. Refer to
Chapter 5, Local Management, for instructions on how to
perform these tasks.
Management. The mode switches should only be used if it is
not possible to make a Local Management connection. Refer to
Chapter 5, Local Management, for instructions on how to
perform these tasks.