Cabletron Systems ESXMIM User Manual

Chapter 8: The Bridge Setup Screen

To select the bridge port pair administrative status, perform the following 
steps:

1. Use the arrow keys to highlight the [BRIDGE_PORT XX] field.

2. Press SPACE bar or BACKSPACE to select the bridge port you want 

to configure. The selected bridge port appears in the Bridge Port Pair 
Admin Status field.

3. Use the arrow keys to highlight the BRIDGE PORT PAIR ADMIN 

STATUS: PORT XX - -> PORT [YY] field.

4. Press SPACE bar or BACKSPACE to select the port you want to 

enable or disable bridge traffic.

5. Use the arrow keys to highlight the BRIDGE PORT PAIR ADMIN 

STATUS: PORT XX - -> PORT [YY] [ENABLED] field.

6. Press SPACE bar or BACKSPACE to select ENABLE or DISABLE.

For example, the following bridge setup indicates that bridge port 01 
is configured NOT to bridge traffic to bridge port 02:

BRIDGE PORT PAIR ADMIN STATUS: PORT 01 - - > PORT [02] 
[DISABLED]

7. Use the arrow keys to highlight the SAVE command field.

8. Press ENTER. The Event Message field at the top of the screen 

displays “SAVED OK”.