Cabletron Systems ESXMIM User Manual
Chapter 11: The Interface Statistics Screen
Page 11-4
ESXMIM/ESXMIM-F2 Local Management Guide
Interface
This command field allows you to select the interface(s) you want to
monitor.
monitor.
11.2
SELECTING AN UPDATE-FREQ
The ESXMIM updates the Interface Statistics screen every three seconds
by default. The UPDATE-FREQ command allows you to adjust the
frequency in intervals of 3 seconds. The maximum update frequency is 99
seconds.
by default. The UPDATE-FREQ command allows you to adjust the
frequency in intervals of 3 seconds. The maximum update frequency is 99
seconds.
To adjust the UPDATE-FREQ, perform the following steps:
1. Use the arrow keys to highlight the UPDATE-FREQ command field.
2. Press [+/=] or [–] until the desired time/frequency appears (this
number increments/decrements in 3-second intervals with a minimum
of 3 seconds and a maximum of 99 seconds).
of 3 seconds and a maximum of 99 seconds).
3. Press ENTER.
11.3
CLEARING STATISTICS COUNTERS
The ESXMIM provides a mechanism for resetting the statistics counter
displays for all interfaces to zero. To clear counters, perform the following
steps:
displays for all interfaces to zero. To clear counters, perform the following
steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command
field.
2. Press ENTER. All counters will be reset to zero and be updated after
the current UPDATE-FREQ has passed.
NOTE
Local Management does not ask for verification before clearing
counters. Initiating this command will clear the counters
immediately.
counters. Initiating this command will clear the counters
immediately.