Cabletron Systems MICROMMAC-22T User Manual

The Phantom Switch (shown in Figure 3-13) enables the port to 
“autowrap” if a trunk cable fails or is removed. The Phantom Switch 
should be set to the appropriate setting before TPIM installation. When 
attaching a Cabletron hub to the TPIM, leave the switch at the factory 
default setting of 1. When attaching a non-Cabletron device to the TPIM, 
such as an IBM 8228 MAU, use the 0 setting.

Ensure that the Ring-In/Ring-Out Switch is in the factory default RI/RO 
position. The MicroMMAC-T does not support the Station (S) setting.

NOTE: If the switch locations on the TPIM do not match the locations 
illustrated in Figure 3-13, refer to the TPIM Reference Card included with 
the TPIM. The TPIM Reference Card outlines switch locations and 
settings. For additional help, call Cabletron Systems Technical Support.

RX+

4

6

1

9

RX-

5

3

6

5