Cabletron Systems pmn User Manual
Chapter 5: Local Management
5-14
2M46-04R/2M46-04RDC User’s Guide
5.6
DEVICE CONFIGURATION MENU SCREEN
, provides access to
Local Management screens that allow you to configure and monitor
operating parameters, modify SNMP community names, set SNMP traps,
configure switch parameters, and configure 2M46-04R ports.
operating parameters, modify SNMP community names, set SNMP traps,
configure switch parameters, and configure 2M46-04R ports.
To access the Device Configuration Menu screen from the Device Menu
screen, use the arrow keys to highlight the DEVICE
CONFIGURATION menu item and press ENTER. The Device
Configuration Menu screen displays.
screen, use the arrow keys to highlight the DEVICE
CONFIGURATION menu item and press ENTER. The Device
Configuration Menu screen displays.
Figure 5-8
Device Configuration Menu Screen
NOTE
The Switch Configuration menu will only display if the
operational mode of the device has been set to 802.1D
SWITCHING or 802.1Q SWITCHING. Refer to
operational mode of the device has been set to 802.1D
SWITCHING or 802.1Q SWITCHING. Refer to
for instructions on configuring the device to operate in this
mode.
mode.
Firmware Revision: XX.XX.XX
Device Configuration Menu
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES
SNMP TRAPS
SWITCH CONFIGURATION
SMARTTRUNK CONFIGURATION
DEVICE SPECIFIC CONFIGURATION
2314_66
Device Type: 2M46-04R
BOOTPROM Revision: XX.XX.XX
2M46-04R LOCAL MANAGEMENT
RETURN
EXIT