Cabletron Systems SEHI100TX- User Manual

Indicates the access status accorded each community name. The 
following conditions are possible:

Basic-Read

This allows Read-Only access to Local 

Management, but excludes read privileges to 
the Component Trap screen.

Read-Only

This allows Read-Only access to Local 

Management, but excludes access to security 
protected fields of the upper levels of 
authorization (Read-Write or Super-User).

Read-Write

This allows the user to read and write to Local 

Management fields, excluding IP Address, 
Subnet Mask, and Community Names.

Super-User

This access privilege gives the user read and 

write access to Local Management. Super-User 
allows read and write access to all modifiable 
parameters including: Community Names, IP 
Addresses, Traps, and SNMP Objects.

The password used to access Local Management at the Password screen 
must have Super-User privileges for the edits to take effect. If a password 
is entered with Basic-Read, Read-Only, or Read-Write privileges, Local 
Management displays the message “AUTHORIZATION PROHIBITS 
ACCESS”, and does not include editing capabilities.

Use the following steps to edit the Community Name field:

1. Use the arrow keys to highlight the Community Name field adjacent 

to the desired access level.

2. Enter the community name (maximum of 32 characters) into the field.

3. Press ENTER.

4. Repeat steps 1-3 for editing any of the other community names.

5. Use the arrow keys to highlight the SAVE command at the bottom of 

the screen, then press ENTER or F6. The “SAVED OK” message 
appears indicating that the edits have been saved to memory.

SEHI Book  Page 9  Wednesday, May 15, 1996  10:42 AM