Cabletron Systems ELS10-26TX User Manual

Configuring Your ELS10-26

3-3

 • Class B addresses are used for medium sized networks. The first 

two bytes identify the network and the last two identify the 
node. The first byte of a class B address must be in the range 128-
191. The address 128.150.50.10 identifies node 50.10 on network 
128.150.

 • Class C addresses are used for small networks. The first three 

bytes identify the network and the last byte identifies the port. 
The first byte of a class C address must be in the range 192-223. 
The address 192.138.217.10 identifies node 10 on network 
192.138.217.

To assign an IP address to a port, at the LCM prompt:

1. Type 

For example, 

 would set the IP address of 

Port 6 to 192.138.217.40. LCM responds by displaying the IP address 
table, as shown under the 

 command.