Cabletron Systems SFCS-1000 User Manual
4-12
Switch Setup
4.7
Installing the Serial Cable
Connect the serial cable (supplied with the switch) from the switch’s serial
port to any tty-type device (such as a terminal, or the serial port of a worksta-
tion or PC running a terminal emulation program).
port to any tty-type device (such as a terminal, or the serial port of a worksta-
tion or PC running a terminal emulation program).
NOTE:
The switch’s tty port comes configured at
9600 baud, 8 bits, no parity and 1 stop bit.
9600 baud, 8 bits, no parity and 1 stop bit.
When you turn on the switch, you should see the switch boot on the tty
device connected to the switch’s serial port.
device connected to the switch’s serial port.
NOTE:
The switch is ready for user configuration asa
soon as it is connected to a tty-type device. To
access the switch, enter asx at the prompt of
the tty device.
soon as it is connected to a tty-type device. To
access the switch, enter asx at the prompt of
the tty device.