Cabletron Systems 9C300-1 User Manual

3-21

Interactive Mode

Select <BACKPLANE> on the Module Specific Screen, as shown in Figure 3-24, to 
access the Module Backplane Screen, as shown in Figure 3-27. The Module 
Backplane Screen displays the current MMAC-Plus backplane configuration for a 
selected module.

Line 1 identifies the selected module by chassis slot location.

Line 2 displays the module’s FNB connection (if applicable) and connection 
status. Refer to the MMAC-Plus Operation Guide for further information about 
FNB configuration.

Line 3 displays the module’s INB connection (if applicable) and connection status. 
Refer to the MMAC-Plus Operation Guide for further information about the 
INB.

Figure 3-27. The Module Backplane Screen

Select <EXIT> to return to the Module Specific Screen.

Select <EM> on the Module Selection Screen, as shown in Figure 3-23, to access 
the Environmental Module Specific Screen, as shown in Figure 3-28. 

Line 1 displays the Environmental Module’s current status (on-line or fault) and 
the hardware revision. 

Line 2 displays the Environmental Module’s firmware and boot prom revision.

Line 3 displays the Environmental Module serial number. 

Figure 3-28. The Environmental Module Specific Screen

Select <ENV> to access the Environmental Module Environment Screen (used to 
view Environmental Module electrical and environmental parameters).

Select <EXIT> to return the display to the Module Selection Screen.

<EXIT>

MODULE xx

INB A B/W ALLOC xxx MBPS

FDDI 1 INS PRI FDDI 2 BYP

<ENV> <EXIT>

EM STATUS ON-LINE HW REV xxx

SN xxxxxxxxxxxx

FW REV x.xx.xx BOOT PROM REV x.xx.xx