Cabletron Systems SEHI-22FL User Guide
The Community Name Table Screen
SEHI User’s Guide
7-9
ACCESS
Indicates the access status accorded each community name. Possible
conditions are as follows:
conditions are as follows:
BASIC-READ
This allows Read-Only access to Local
Management, but excludes read privileges to
the Component Trap screen.
Management, but excludes read privileges to
the Component Trap screen.
READ-ONLY
This allows Read-Only access to Local
Management, but excludes access to security
protected fields of the upper levels of
authorization (Read-Write or Super-User).
Management, but excludes access to security
protected fields of the upper levels of
authorization (Read-Write or Super-User).
READ-WRITE
This allows the user to read and write to Local
Management fields, excluding IP Address,
Subnet Mask, and Community Names.
Management fields, excluding IP Address,
Subnet Mask, and Community Names.
SUPER-USER
This access privilege gives the user read and
write access to Local Management. Super-User
allows read and write access to all modifiable
parameters including: Community Names, IP
Addresses, Traps, and SNMP Objects.
write access to Local Management. Super-User
allows read and write access to all modifiable
parameters including: Community Names, IP
Addresses, Traps, and SNMP Objects.
Editing the Community Name Field
The password used to access Local Management at the Password screen
must have Super-User privileges for the edits to take effect. If a password
is entered with Basic-Read, Read-Only, or Read-Write privileges, Local
Management displays the message “AUTHORIZATION PROHIBITS
ACCESS”, and does not include editing capabilities.
must have Super-User privileges for the edits to take effect. If a password
is entered with Basic-Read, Read-Only, or Read-Write privileges, Local
Management displays the message “AUTHORIZATION PROHIBITS
ACCESS”, and does not include editing capabilities.
To edit the Community Name field:
1. Use the arrow keys to highlight the Community Name field adjacent
to the desired access level.
2. Enter the community name (maximum of 32 characters) into the field.
3. Press ENTER.
4. Repeat steps 1–3 for editing any of the other community names.
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen, then press ENTER or F6. The “SAVED OK” message
appears indicating that the edits have been saved to memory.
appears indicating that the edits have been saved to memory.
SEHI Book Page 9 Friday, April 19, 1996 10:46 AM