Intel 10/100 User Manual
64
C H A P T E R
3
Intel Express 10/100 Fast Ethernet Switch
set-br-fwdel
set-br-fwdel <forward_delay>
Sets the spanning tree bridge forward delay. Forward delay is the time
interval in seconds spent waiting to change a port from its spanning
tree preforwarding state to a forwarding state. This is necessary
because every bridge on the network should ensure no loop is formed
before allowing the port to forward packets.
interval in seconds spent waiting to change a port from its spanning
tree preforwarding state to a forwarding state. This is necessary
because every bridge on the network should ensure no loop is formed
before allowing the port to forward packets.
forward_delay
is in seconds, from 4 to 30. However, the
corresponding MIB variable, dot1dStpBridgeForwardDelay (RFC
1493), is in hundreths of seconds from 400 to 3000, and must be a
multiple of 100.
1493), is in hundreths of seconds from 400 to 3000, and must be a
multiple of 100.
set-prt-prio
set-prt-prio <port_number> <port_priority>
Sets the spanning tree port priority.
port_number
is the decimal port
number, and
port_priority
is a number from 1 to 255. This is
equivalent to setting the MIB variable dot1dStpPortPriority
(RFC 1493).
(RFC 1493).
set-prt-enb
set-prt-enb <port_number> {enable|disable}
Enables or disables a port in the spanning tree.
port_number
is the
decimal port number. This is equivalent to setting the MIB variable
dot1dStpPortEnable (RFC 1493).
dot1dStpPortEnable (RFC 1493).
set-prt-pcost
set-prt-pcost <port_number> <path_cost>
Sets the spanning tree port path cost.
port_number
is the decimal port
number, and
path_cost
is path cost from 1 to 65535. This is
equivalent to setting the MIB variable dot1dStpPortPathCost
(RFC 1493).
(RFC 1493).