IMC Networks AccessEtherLinx/4 User Manual
21
When using iView² with HP OpenView
During the installation, the iView² application will ask if HP Open View is installed on
the management PC. Click Yes to integrate the appropriate files. Once in
OpenView, select IMC Networks from the toolbar to view the IMC Networks’
devices.
the management PC. Click Yes to integrate the appropriate files. Once in
OpenView, select IMC Networks from the toolbar to view the IMC Networks’
devices.
When Not Using iView
²
When using an application other than iView² for management, integrate the SNMP
vendor files (a.k.a. MIBs) into the application. The SNMP agent uses the following
Enterprise-specific MIB file and standard MIBs, which can be found in the MIB
directory on the CD included with the iMediaChassis/3: MCIMCV2C.MIB Enterprise
specific information for the agent. For example, configuration information, port type
information, link status, etc.
vendor files (a.k.a. MIBs) into the application. The SNMP agent uses the following
Enterprise-specific MIB file and standard MIBs, which can be found in the MIB
directory on the CD included with the iMediaChassis/3: MCIMCV2C.MIB Enterprise
specific information for the agent. For example, configuration information, port type
information, link status, etc.
Using the IMC MIBs
Refer to the MIBs folder located with the iView² software for product-related MIBs.
Appendix
The AccessEtherLinX/4 offers an optional method of configuring the device
via a Console session by connecting an RJ-45 to DB9 adapter. This adapter
is available for purchase through IMC Networks. End users can also wire
their own adapter using the schematic below.
via a Console session by connecting an RJ-45 to DB9 adapter. This adapter
is available for purchase through IMC Networks. End users can also wire
their own adapter using the schematic below.