IBM 12.1(22)EA6 User Manual
9-23
Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Chapter 9 Configuring STP
Displaying the Spanning-Tree Status
To return the switch to its default setting, use the no spanning-tree vlan vlan-id max-age global
configuration command.
configuration command.
To return to the default setting, use the no spanning-tree transmit hold-count value global
configuration command.
configuration command.
Displaying the Spanning-Tree Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in
You can clear spanning-tree counters by using the clear spanning-tree [interface interface-id]
privileged EXEC command.
privileged EXEC command.
For information about other keywords for the show spanning-tree privileged EXEC command, see the
command reference for this release.
command reference for this release.
Table 9-5
Commands for Displaying Spanning-Tree Status
Command
Purpose
show spanning-tree active
Displays spanning-tree information on active interfaces only.
show spanning-tree detail
Displays a detailed summary of interface information.
show spanning-tree interface interface-id
Displays spanning-tree information for the specified interface.
show spanning-tree summary [totals]
Displays a summary of port states or displays the total lines of the STP state
section.
section.