IBM 12.1(22)EA6 User Manual

Page of 550
 
10-3
Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Chapter 10      Configuring MSTP
Understanding MSTP
All MST instances within the same region share the same protocol timers, but each MST instance 
has its own topology parameters, such as root switch ID, root path cost, and so forth. By default, all 
VLANs are assigned to the IST. 
An MST instance is local to the region; for example, MST instance 1 in region A is independent of 
MST instance 1 in region B, even if regions A and B are interconnected. 
A common and internal spanning tree (CIST), which is a collection of the ISTs in each MST region, 
and the common spanning tree (CST) that interconnects the MST regions and single spanning trees. 
The spanning tree computed in a region appears as a subtree in the CST that encompasses the entire 
switched domain. The CIST is formed by the spanning-tree algorithm among switches that support 
the IEEE 802.1w, IEEE 802.1s, and IEEE 802.1D standards. The CIST inside an MST region is the 
same as the CST outside a region. 
For more information, see the 
 and the .
Operations Within an MST Region
The IST connects all the MSTP switches in a region. When the IST converges, the root of the IST 
becomes the IST master.  It is the switch within the region with the lowest switch ID and path cost to 
the CST root. The IST master also is the CST root if there is only one region in the network. If the CST 
root is outside the region, one of the MSTP switches at the boundary of the region is selected as the IST 
master.
When an MSTP switch initializes, it sends BPDUs claiming itself as the root of the CST and the IST 
master, with both of the path costs to the CST root and to the IST master set to zero. The switch also 
initializes all of its MST instances and claims to be the root for all of them. If the switch receives superior 
MST root information (lower switch ID, lower path cost, and so forth) than stored for the switch, it 
relinquishes its claim as the IST master. 
During initialization, a region might have many subregions, each with its own IST master. As switches 
receive superior IST information, they leave their old subregions and join the new subregion that 
contains the true IST master. Thus all subregions shrink, except for the one that contains the true IST 
master. 
For correct operation, all switches in the MST region must agree on the same IST master. Therefore, any 
two switches in the region synchronize their port roles for an MST instance only if they converge to a 
common IST master.