IBM 12.1(22)EA6 User Manual

Page of 550
 
4-21
Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Chapter 4      Administering the Switch
Managing the MAC Address Table
To verify that dynamic entries have been removed, use the show mac address-table dynamic privileged 
EXEC command.
Configuring MAC Address Notification Traps
MAC address notification enables you to track users on a network by storing the MAC address activity 
on the switch. Whenever the switch learns or removes a MAC address, an SNMP notification can be 
generated and sent to the NMS. If you have many users coming and going from the network, you can set 
a trap interval time to bundle the notification traps and reduce network traffic. The MAC notification 
history table stores the MAC address activity for each hardware port for which the trap is enabled. MAC 
address notifications are generated for dynamic and secure MAC addresses; events are not generated for 
self addresses, multicast addresses, or other static addresses.
Beginning in privileged EXEC mode, follow these steps to configure the switch to send MAC address 
notification traps to an NMS host:
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
snmp-server host host-addr {traps | informs} {version {1 
2c 3}} community-string notification-type
Specify the recipient of the trap message.
For host-addr, specify the name or address of the 
NMS.
Specify traps (the default) to send SNMP traps 
to the host. Specify informs to send SNMP 
informs to the host.
Specify the SNMP version to support. Version 1, 
the default, is not available with informs.
For community-string, specify the string to send 
with the notification operation. Though you can 
set this string by using the snmp-server host 
command, we recommend that you define this 
string by using the snmp-server community 
command before using the snmp-server host 
command.
For notification-type, use the mac-notification 
keyword.
Step 3
snmp-server enable traps mac-notification
Enable the switch to send MAC address traps to the 
NMS.
Step 4
mac address-table notification
Enable the MAC address notification feature.