Cabletron Systems SFCS-200BX User Manual

The PCA-200PC ATM Adapter provides ATM connectivity to PCI-based PCs
and servers, and has the following specifications:

On-board 25 Mhz i960 RISC processor

Special-purpose hardware for AAL5 and AAL3/4, HEC, and CRC
calculations

100 Mbps TAXI (4B/5B encoding);
155Mbps OC-3/SONET STS-3c/SDH STM-1

Single-slot PCI bus, half-card

ATM cell processing per ANSI T1S1.5/92-002R3, ITU I.361, and
ATM Forum UNI v3.0 specification

Duplex 62.5/125 

µ

m multimode fiber (2 km max. run, 10 dB loss);

2-pair 100 ohm CAT 5, or CAT 5 screened, UTP (100 meters max.)

ST and SC Types for multimode fiber; RJ-45 for CAT 5 UTP copper

Transparent standard protocol interface NDIS 3.0, ODI Server
SPANS Switched Virtual Circuits (SVCs) signaling protocol
Permanent Virtual Circuits (PVCs)
Supports up to 1024 Virtual Circuit Identifiers (VCIs)
Support for UNI 3.0 signalling
Support for LAN Emulation Clients

H: 0.5" x W: 3.3" x D: 5.8" (1.3 cm x 8.4 cm x 14.7 cm)

6 oz (170 g)

2 amps (maximum) @ +5V

32˚F to 104˚F (0˚C to 40˚C)

20% to 80% non-condensing @ 40˚C

FCC Part 15, Class A Verification and UL 1950