Cabletron Systems 2H23-50R User Manual
Chapter 5: Local Management
5-54
2H23-50R/2H33-37R User’s Guide
Reboot After Download (Modifiable only when the user chooses
RUNTIME)
RUNTIME)
This field notifies the user that the 2H23-50R or 2H33-37R will reboot
after the download is complete. If a Runtime Download is performed, this
field toggles between YES and NO. If YES is selected, the device reboots
after the download is completed. If NO is selected, the device continues
using the existing firmware image and stores the new firmware image in
FLASH memory. When the device is reset or during the next power-up,
the device boots from FLASH memory using the new image.
after the download is complete. If a Runtime Download is performed, this
field toggles between YES and NO. If YES is selected, the device reboots
after the download is completed. If NO is selected, the device continues
using the existing firmware image and stores the new firmware image in
FLASH memory. When the device is reset or during the next power-up,
the device boots from FLASH memory using the new image.
TFTP Gateway IP Addr (Selectable)
This field shows the IP address of the TFTP gateway server defined on the
General Configuration screen in
General Configuration screen in
Last Image Server IP (Read-only)
This field shows the IP address of the server used for the previous FLASH
Download.
Download.
Last Image File Name (Read-only)
This field shows the complete path and file name of the last image
downloaded to FLASH.
downloaded to FLASH.
Download Server IP (Selectable)
The IP address of the TFTP server to be used for the FLASH download is
entered in this field.
entered in this field.
Download File Name (Selectable)
The complete TFTP Server path and file name of the new image is entered
in this field.
in this field.
NOTE
If TFTP or RUNTIME is selected as the download method (see
), the following two additional fields display.