Cabletron Systems 2H23-50R User Manual
2H23-50R/2H33-37R User’s Guide
5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
Local Management. It also explains how to use the Local Management
screens and commands.
Local Management. It also explains how to use the Local Management
screens and commands.
5.1
OVERVIEW
Local Management consists of a series of screens that allow the
management of the 2H23-50R or 2H33-37R. The screens allow the user
to do the following tasks:
management of the 2H23-50R or 2H33-37R. The screens allow the user
to do the following tasks:
•
Assign IP address and subnet mask.
•
Select a default gateway.
•
Control access by establishing community names.
•
Download a new operation firmware image.
•
Designate which Network Management Workstations receive SNMP
traps from the device.
traps from the device.
•
View bridge and port statistics.
•
Configure switch operations (802.1D, 802.1Q, or SecureFast
Switching).
Switching).
•
Control the number of receive broadcasts that are switched out to the
other interfaces.
other interfaces.
•
Clear NVRAM.
There are three ways to access Local Management:
•
Locally using a VT type terminal connected to the COM port of the
2H23-50R or 2H33-37R.
2H23-50R or 2H33-37R.
•
Remotely using a VT type terminal connected through a modem.
•
In-band through a Telnet connection.