Cabletron Systems 1800 User Manual

Configuring Bridge Ports

11-7

Bridge Configuration

This value will cause the port to be enabled (if No) or disabled (if Yes) when the 
device is powered up or rebooted. Whichever state is selected, the port will 
remain in that state until this value is changed or until an enable or disable action 
is performed. The default value for this parameter is No.

First, access the Bridge/LLC2 Frame Relay Interface Table (see 

).

To add a new Frame Relay bridge port:

1.

Enter the RLP, Port, and DLCI numbers, and the other configurable values for 
each bridge port.

2.

Click on 

 to add your new entry.

To modify an existing entry:

1.

In the list box, click to select the Frame Relay Interface you wish to modify. 
The selected entry will be highlighted. (Note that you can only modify one 
entry at a time.)

2.

Edit the fields, as desired. If you make some changes, and would like to return 
to the original values, click on the Refresh button.

3.

Click on 

 to modify the selected entry.

To delete an existing entry:

1.

In the list box, click to select the Frame Relay Interface you wish to delete. The 
selected entry will be highlighted. (Note that you can only delete one entry at 
a time.)

2.

Click on 

 to delete the selected entry.

You can use the Bridge/LLC2 LAN Interface Table to conÞgure a LAN interface to 
operate as a bridge connection to the local LAN. To access the table:

1.

Click on 

 to display the Device menu.