Cabletron Systems 2E43-51 User Manual

Chapter 5: Local Management

65 – 127 Octets (Read-only)

Displays the total number of packets, including bad packets, received that 
were between 65 and 127 bytes in length (excluding framing bits, but 
including FCS bytes).

128 – 255 Octets (Read-only)

Displays the total number of packets, including bad packets, received that 
were between 128 and 255 bytes in length (excluding framing bits, but 
including FCS bytes).

256 – 511 Octets (Read-only)

Displays the total number of packets, including bad packets, received that 
were between 256 and 511 bytes in length (excluding framing bits, but 
including FCS bytes).

512 – 1023 Octets (Read-only)

Displays the total number of packets, including bad packets, received that 
were between 512 and 1023 bytes in length (excluding framing bits, but 
including FCS bytes).

1024 – 1518 Octets (Read-only)

Displays the total number of packets, including bad packets, received that 
were between 1024 and 1518 bytes in length (excluding framing bits, but 
including FCS bytes).

nn] (Command)

This command is used to enter an index number for viewing statistics. For 
instructions on how to use this command, refer to 

CLEAR COUNTERS (Command)

This command is used to reset all statistic counters to zero. For details on 
how to use this field, refer to 

.

To display the statistics for any index, proceed as follows:

Use the arrow keys to highlight the Index [nn] field at the bottom of 
the screen.

Press the SPACE bar to increment (or press the DEL [delete] key to 
decrement) the index number.