Cabletron Systems 6E132-25 User Manual

Chapter 5: Local Management

Access the High Speed Interface Configuration Menu screen from the 
Module Specific Configuration Menu screen by using the arrow keys to 
highlight the HIGH SPEED INTERFACE CONFIGURATION 
MENU menu item and pressing ENTER. The High Speed Interface 
Configuration

 screen displays.

The High Speed Interface Configuration screen displays the types of 
interfaces installed in ports 25 and 26, their current operating mode, and 
indicates if the ports are linked. This screen also allows the user to enable 
or disable Auto-Negotiation and set the Advertised Ability.

When the HIGH SPEED CONFIGURATION MENU is selected 
for the 6E13X-25 the applicable HSIM Setup screen displays. 
Refer to the HSIM User’s Guide to set operating parameters for 
the HSIM installed in the 6E13X-25.

The High Speed Interface Configuration screen, 

applies only to ports 25 and 26 of the 6E12X-26. This screen 
supports the FE-100TX, FE-100FX and FE-100F3 Fast 
Ethernet Interface Modules that operate at 100 Mbps. If you are 
configuring a 6E13X-25, refer to the applicable HSIM User’s 
Guide, or proceed to